Power supplies used by the military may be similar to those used in other industries, but the demands of military operations require increased ruggedness, durability, and reliability. Supplies and devices must be able to perform seamlessly in a variety of intense climates and harsh terrains. They must also be able to ensure long cycles of use with minimal maintenance.
Military power supplies must meet very high standards to ensure quality of performance in diverse and often challenging deployment environments. Meticulous design and construction enable higher efficiency, smaller size, and lower weight. High standards also meet the challenges of multi-voltage electronics and the complexity of distributed systems. Here are some of the ways military power supplies provide superior performance:
CE requirements, in force since 1997, require compliance with EN601010-1 safety standards with thicker insulators and higher clearance for high-voltage circuits. Shrouded connectors and relief clip connector covers prevent accidental user contact with exposed screw terminal strips or bus bars. These standards place users at less risk of injury from inadvertent contact.
Military specifications also guide military-grade power supplies: MIL-STD-704 (aircraft), MIL-STD-1275 (ground), MIL-STD-1399 (shipboard), MIL-STD-810 (environmental test methods), and MIL-STD-461 (EMI). These standards cover voltage, maximum current, frequency, electrical noise, and abnormal conditions for both AC and DC systems.
Specifications for high-impact shock are also clarified by MIL-S-901. These standards cover shock testing requirements for shipboard machinery, equipment, systems, and structures. The purpose of the MIL-S-901 standards is to ensure the ability of shipboard power installations to withstand the shocks incurred due to nuclear or conventional weapons. Universal input power-factor corrected units can operate off a wide range of AC input line voltage, which means they can be used just about anywhere in the world without the complication of finding an appropriate voltage selection.
Point of load (POL) converters output very low voltages at high efficiencies. By permitting low voltage at high currents, it becomes easier to provide low-voltage power from a single power source to multiple isolated supplies. The converters are also small and can reduce board size, weight, heat, and even cost while doubling or tripling processing power. Distributed systems, instead of centralized ones, deliver considerable power with less development cost and in a shorter timeframe. A faster design cycle means a product can be deployed with a relatively short turnaround time.
Zero voltage switching (soft switching) reduces electromagnetic noise while also preventing interference with electronic equipment. Soft switching eliminates the power loss that occurs when power transistors change from a conducting state to a non-conducting state. This reduction in waste can improve power supply efficiency by 7 to 8 percent. This may equate to saving 70 to 80 watts of dissipation as the efficiency of a 1000 watt power supply increases from 89% to 95%. A soft-switching power supply unit will not only generate less electrical noise than other power supplies, but it offers longer mean time between failure.
Although military units have adopted COTS standards of reliability and performance, such standards may be insufficient in the field due to mission-specific requirements. Devices used aboard military aircraft, armored vehicles, and naval vessels endure extreme and extensive use and require more rigorous design. They must also perform at a high level without failure.
The following power supply components are manufactured for the defense industry with ruggedness in mind:
Circuit boards are encased in metal and shielded from electromagnetic interference to withstand extreme conditions. Gold plating may be used to prevent corrosion in damp environments and optimize electronic circuit grounding. A range of input options also provides military power supplies with the versatility needed in the field.
It’s not enough for power supply units to be rugged and extremely reliable. They must also perform diagnostic operations on their own. Many power supplies report various operating conditions such as over/under voltage, over/under current, and temperature. Some power supplies offer N+1 redundancy and when the primary unit fails, a message is sent that the back up system is running, triggering a technician to respond. This permits technicians to troubleshoot devices before they stop working completely and must be decommissioned for repair. It’s too risky for military equipment to break down when they’re needed most.
Although the three configurations of military power supplies — AC-DC, DC-DC, and DC-AC — are similar to COTS supplies, reliability couldn’t be more different. This reliability extends to a wide range of temperatures, extreme shock, and even high impact.
COTS supplies have a shorter mean-time-between-failure (MTBF) rating than military-grade power supplies when measured in like environments. This means a greater likelihood of interruptions. Such interruptions can be life-threatening for military transportation applications.
Military-grade supplies, on the other hand, are highly regulated to ensure high quality and have clear specifications for various environments. When the defense industry uses COTS power supplies, it must understand the greater likelihood of obsolescence, EMI issues, and environmental vulnerability. Using COTS supplies could require significant modifications to compensate for the risks.
MIL-SPEC reliability requirements are found in most military applications and are needed to prepare supplies for deployment in harsh environments. MIL-HDBK-217 was designed to determine the reliability of military and aerospace equipment and systems. The MTBF numbers help companies analyze the reliability of individual components and the overall system.
The durability and reliability of military power supplies make them suitable not just for military purposes but for the high-power needs of the aerospace industry as well.
Since even military-grade supplies can become outdated, it’s important to upgrade as safer, more powerful models become available. Once older components become obsolete, they may no longer be compatible with newer power systems. Fortunately, military power supplies are usually updated every two years, so you can easily secure the very latest rugged and reliable design. Military power conversion vendors are creating more rugged and efficient products every year.
For example, uninterruptible power supplies (UPS) are increasingly critical during extended military operations. They prevent data loss, maintain battery charge, and also provide reliable, continuous power, and surge protection. UPSs and power distribution units (PDUs) overcome the usual instabilities, frequency variations, and distortion problems when energy resources are scarce. COTS units should be repackaged or replaced to meet shock, vibration, and temperature challenges.
Although upgrading your power supply system makes it safer to use and more effective at providing power, industry regulations require that products are repairable.
Military-grade power supplies are not just for defense industry use. They’re helpful for any business that runs projects outdoors and requires supplies that can endure harsh climates and heavy
travel. In fact, power supplies that meet MIL-SPEC standards are used for industrial and commercial purposes.
If your business needs power units that remain highly effective despite small problems, you should consider the ruggedness of military-grade supply units. Rugged supplies provide predictable and useful service regardless of the nature of the work — for example, having a hard casing that prevents sand and dirt from infiltrating the unit.
Since heavy duty military-grade power supplies last longer than COTS units, you’ll spend less money in the long run.
Advanced Conversion Technology (ACT) offers reliable, cost-effective solutions to the most demanding requirements in various industries, including military (air, sea, and land), transportation, communications, and civilian aerospace and aviation. We provide engineered solutions for any customer in need of military-grade quality and ruggedness. We can engineer the right products for your business if you need power supplies that can withstand the harshest conditions.
ACT has been offering reliable, affordable, high-performance power supplies since 1981. We’ve spent years customizing solutions for customers in the military and aerospace industries, providing them with highly reliable products that meet stringent environmental requirements. Our engineered power supplies meet precise weight, efficiency, size, hermeticity, and ruggedness requirements.
We’ve designed and manufactured an extensive range of AC-DC and DC-DC power supplies in addition to inverters, and we provide support for the entire life cycle of our components. Our AC-DC products like a 3 Phase 400 Hz Power Supply meet special requirements for shock and vibration, high altitude, and extreme temperatures. Our DC-DC power supplies (including our 270 VDC power supply and 28 VDC Power Supply) handle high-voltage spikes and MIL-STD-1275 specifications for low input voltage transients.
We manufacture a diverse range of rugged and reliable power supplies that are fully compliant with MIL-STD-704, which sets our requirements for input transient, maximum allowable distortion, and also acceptable limits for under-voltage and over-voltage. Our aircraft applications for the Navy and Air Force, for example, currently meet MIL-STD-704 aircraft standards for infrared systems, radar, cockpit displays, helmet displays, aerial refueling, identifying friend or foe, navigation, and countermeasures.
As a trusted supplier to the defense industry, we’ve adhered to the highest quality processes for power supplies, and our quality management system is AS9100D. These standards, however, apply to all of our products, including non-military aerospace, industrial, and general commercial applications like communications, shipping, and marine transport. Power supplies for cellular, satellite, and radio communications systems meet strict requirements for low harmonic distortion, failure rates, high efficiency, and low noise.
Although our core business provides power supplies for aerospace and MIL-STD-1399-compliant shipboard electronics, we also provide MIL-STD-1275-compliant power supplies for ground vehicles, featuring EMI shielding, multiple outputs, and other advanced features. Our 30+ years of engineering expertise helps us design the most reliable power for tanks, mine rollers, and other ground vehicles and equipment. Hardware must be able to withstand dusty, humid conditions as well as the shocks that occur when navigating over rough terrain. Ruggedized frames protect our power supplies from damage. Hermetically sealed modules keep equipment dust-free and safe at any humidity level and temperature.
Whatever your needs, we can design the most rugged, reliable, and cost-effective power supply solution, whether you require a single-phase AC-DC, a three-phase, or a DC-DC one. We can engineer and design power supplies to the highest standards, providing sophisticated solutions to the most demanding environments and applications.
Contact us and find out how our expertise in military-grade power supplies can engineer high-performance yet affordable solutions for your business needs today.